Expert since 1970

Tilting gate with mechanical closure

1 – Scope of use:

Regulation of a water level in open civil engineering works by a tilting blade

One way direction of flow, on the upstream side only

2 –Technical characteristics:

Mechanically welded set of frame and blade, to be wall mounted. Sealing on three (3) sides ensured by a removable flat rubber. Sealing between the frame and the work is ensured on the sill by a self-adhesive rubber-foam seal (supplied).

The tipping shovel is made of a rigid one-piece sheet metal that is adjustable in all positions. Lifting of the shovel by trapezoidal threaded rod.

3 – Dimensions – on request :

From  500 x 200mm  up to  1000 x 1200 mm.

Larger dimensions on demand.

4 – Types of drives :

Drive mounted on headstock type  AF7 to AF 9.


The materials used in the basic version for the various equipment and accessories are as follows:

1 – Frame, plate, headstock

Steel – galvanized (St-37) DIN 1.0037
Stainless steel (304)  DIN 1.4301
Stainless steel (316TI) DIN 1.4571
Aluminium (AlMg3) DIN 3.3535
Cast iron (GG25) DIN GJL250

Other material on request.

2 – Bolst and nuts

Stainless steel V4A

3 – Sealant gaskets


Autres matériaux sur demande.

4 – Threaded shaft

Stainless steel (V2A) DIN 1.4104
Stainless steel (V2A) DIN 1.4301
Stainless steel (316TI) DIN 1.4571

5 – Mother piece

Bronze – RG7  2.1090 – RG7 – Cu Sn 7 Zn  Pb

Contact us for a quotation

All tailor-made solutions available